

Wireless CO2, Temp/Hum datalogger with display

The HOBO® MX1102 logger records and transmits temperature, relative humidity and CO2 levels in indoor environments using its built-in sensors. This low power Bluetooth® logger is designed for wireless communication with a mobile device and also supports a USB connection.
The HOBO® MX1102 logger records and transmits temperature, relative humidity and CO2 levels in indoor environments with its integrated sensors.
This low-power Bluetooth® logger is designed for wireless communication with a mobile device and also supports a USB connection. You can easily set up the logger, read it and view the plotted data using the HOBOmobile® app on your phone or tablet or the HOBOware software on your computer.
The logger can calculate minimum, maximum, mean and standard deviation statistics and can be configured to trigger audible or visual alarms at thresholds you specify.
This compact data logger also features an LCD display that shows real-time readings, recording mode, battery level, memory used, and more.
- Miscellaneous
-
- Power supply
- 4 x 1.5V AA batteries (user replaceable) or via USB cable
- Size
- 7.61 x 12.95 x 4.78 cm
- Weight
- 267.4 g
- External power supply
- USB
- Power supply autonomy
- 6 months with recording interval of 5 minutes or slower
- Operating temperature
- 0°C to 50°C (non-condensing)
- Protection
- IP50
- Bluetooth® range
- approx. 30.5 m line of sight
- Display
- visible from 0°C to 50°C, LCD may be slower or no longer display for temperatures outside this range
- Communication
- Bluetooth
- Memory
- 128 KB (approx. 84,600 records)
- Recording interval
- 1 second to approx. 18 hours
- Temperature
-
- Measure
- Temperature
- Resolution
- 0.024°C at 25°C
- Accuracy
- ±0.21°C
- Measuring range
- 0°C to 50°C
- Drift
- less than 0.1°C per year
- Response time
- 12 minutes at 90% in air at 1 m/s
- Humidity
-
- Measure
- Humidity
- Resolution
- 0.01%
- Accuracy
- ±2% from 20% to 80% typical to a maximum of ±4.5% including hysteresis at 25°C
- Measuring range
- 1 to 70% humidity when the CO2 sensor is active (non-condensing), 1 to 90% when it is deactivated.
- Drift
- less than 1% per year on average
- Response time
- 1 minute at 90% in air at 1 m/s
- CO2
-
- Measure
- Carbon dioxide (CO2)
- Accuracy
- ±50 ppm ±5% at reading at 25°C (77°F), less than 70% humidity and 1013 mbar
- Measuring range
- 0 to 5 000 ppm
- Measurement principle
- non-dispersed infrared absorption (NDIR)
- Response time
- 1 minute at 90% in air at 1 m/s
You might also like

10 other products in the same category:

Temp/Hum datalogger with display (external...

Temperature, hygrometry and pressure...

Hand-held light meter with datalogger and...

Temperature, hygrometry, pressure and CO2...

Stainless steel temperature recorder with...

Mini temperature datalogger

Temp/Hum datalogger with display

Mini temperature and hygrometrie datalogger

Temperature y hygrometry datalogger
