

Stainless steel temperature sensor with RJ connector

Stainless steel temperature sensor for air, water and soil. Compatible with Davis Instruments Envoy and Envoy8X consoles, Vantage Pro 2 weather stations and Enviromonitor Nodes. Please note, no humidity measurement.
Stainless steel temperature sensor with RJ11 connector, measures air, water and ground temperature. The RJ11 connector allows the sensor to be connected directly to an Envoy or Envoy8X console (indoor temperature) or to a Vantage Connect. It is also possible to connect the sensor to a VP2 sensor suite (instead of the VP2 temperature/humidity sensor) or to a 6331EU or 6332OV radio transmitter.
To measure air temperature you must place the stainless steel probe in the 7714 radiation shield.
ATTENTION: Probe not compatible with the 6345OV station, the 6345OV station uses the 6470 probes.
- Miscellaneous
-
- Composition
- Stainless steel probe
- Resolution
- 1°C
- Accuracy
- ±0.5°C
- Measuring range
- -40°C to +65°C
- Wiring
- RJ12 plug
- Measurement principle
- Platinum thermistor
- Length
- 7.6 m
You might also like

10 other products in the same category:

Ultrasonic anemometer for Vantage Pro 2

Standard wind vane anemometer

Ultrasonic Anemometer for Davis...

Air temperature and humidity measuring...

Temperature sensor with RJ connector

Agricultural measuring station with 8 probes

Air/water/soil temperature sensor

Temperature and humidity sensor with...

UV probe
