Tipping Trough Replacement Kit for Vantage Pro2 - 0.5m cable
Single bucket tilt system for Davis Instruments rain gauges. Compatible with original dual bucket rain gauges.
This kit replaces the tipping bucket system of Davis Instruments metric rain gauges.
It is compatible with all Davis Instruments rain gauges, regardless of generation.
This single bucket system improves the quality of rainfall measurement. Calibration is carried out at the factory and is not necessary after installation. However, it is possible to adjust the tipping sensitivity of the trough by means of a screw.
Based on 13
reviews
-
Perfect! Very easy change. IMPECCABLE (Translated review)
-
Not installed yet (Translated review)
-
Works excellent
-
This is a typical example of what I describe as "keeping up with technological developments". Not only do you allow us to put a weather station back into service, but you also help us to improve it by bringing it up to date; a sort of Upgrading on the shelf! I was particularly impressed by the compactness and certainly the robustness of this element, which seems to me to be much less exposed to the daily "hassles" of the weather and better protected from our inevitable enemies, spiders in particular! So, congratulations again. (Translated review)
-
ok (Translated review)
-
This practical tool allows Davis rain gauges to be upgraded and extends their service life. (Translated review)
-
compliant. (Translated review)
-
Perfect (Translated review)
-
. (Translated review)
-
Quality materials (Translated review)
10 other products in the same category:
ILS Sensor for Vantage Pro 2 Rain Gauge
Vantage Pro2 anemometer arm
Vantage Pro 2 Rain Gauge Magnet Holder
Vantage Pro 2 wind vane spoiler (old...
Mounting base for Anemometer 7911 (Vantage...
Replacement solar panel for active...
220 Volt Adapter for Vantage Pro
Thermo-Hygrometer Sensor for Vantage Pro 2...